OK, something to spice up GeekZone = here is where we post images of the INSIDE of audio equipment. Disclaimer; any photo...

Tim Farrant

DSP Innovations has recently launched a FREE data sheet search site. The site, Datasheetpro.com - Search Electronic Components ,...

gabriel1

I have been collecting schematics for 30 years and 5 years ago I started make them available at my site www.SecretMind.dk but...

MicroSonic

A good long time friend died last week. I had known him for over 40 years. His family gave me some old equipment that he had in...

Thomas W. Bethe

I have a couple of AKG C12's and one of the PSU's started smoking on Friday Mic is fine and it was still passing audio but I...

Sniperschool

I am wondering whether I should strap some jensens on this to get closer to the authentic sound from the console. I already...

antoniosolo

Hi everyone , I'm based in the UK (Oxford) and looking for help to repair two B77 Mk II machines and ideally to mod them. They...

Apemandan

My fiancée is a singer who has been using her Yamaha MG82cx mixer without issue for the last 6 or so years. Unfortunately, she...

imdurc

Hey gang! I have this 24ch Soundtracs Topaz that I love working on and have kept it happy for a quite a few years now. Pres...

Grefftogan

Is replacing a K67(I believe) to K47 capsule in something like Karma 58/Rode NTK mics is as simple as cut the wire, and solder...

Lifted

Hey gearslutz ! I need some informations about the philips LBB 1151/51 preamp. Does anybody have a manual or a schematic...

Mablonowski Jarc

Hi there, Does anyone know about this? I can find two different versions on the web, not sure which one is correct ?...

Brett 123

I'm trying to find out through the rear cover, which voxbox models incorporate the new power supply, from the end of 2021, it...

cuerdadeplatino

How much width is actually available in a 19" rack to place jacks, switches and knobs?

audiothings

Hello, as we all know, the Korg ARP 2600M lacks the keyboard included with the bigger version with its desiderable features......

sin night

Hi all, I'm not sure this is even the right place to post this, but wanted to put the info out there in case it helps somebody...

HockeyMike

Searched around enough and after reading endless (I think socket 1 is instrument / I think socket 1 is to turn it on / I think...

Tziolas23Wash

Well my old Digimax D8 died - no power. Just went to use it and she was off. Anyways on the Power Supply board I have a...

defunkmike

Hello, I'm very new to using a soldering iron, but I've soldered a few hundred cable connectors so far and put together a...

trubadoor

Hi, this is my first time posting on gear space.com. I don't know if this is the right Forum for this but maybe its the Forum...

mostlytellur

Hello family, I just recently purchased a Roland DEP-5 from a store in Tokyo. The first thing I will do is change the current...

shortyboyboy

I am trying to source some quality replacement parts to have on hand for repairing and maintaining a Toft ATB console. I am...

archfrenemy

Hello everyone and I hope to be in the right section of the forum and to receive your opinion on the real quality of these...

BOMI

Hello, I'm looking for the Schematic for the Series 800. If anyne got them, I would really appreciate if they could...

Martel80

Hello, Im a beginner in audio electronics, i have made some smaller stuff and got some basic knowledge. My dream project is a...

dunderogge

Just thought I'd post a link to this as I've seen a lot of people are after a...

JamieOxford

Any one have any info on doing the mackie onyx 1640 post fader direct out mod? I looked on the net but mackie's forum is down....

dude24man

Hello! My powers supply for my tascam m520 keeps blowing f1. I took a look inside and nothing looks wrong. The only thing I think...

Benjamindickens

Hello everybody, I hope somebody can help me I recently got a Tascam TSR-8 in very good physical conditions, the previous...

omarcaveman

Anyone have a copy of the MXR Flanger/Doubler 126 manual hanging around in PDF? Its the Blueface 2 space rackmount one.

ZEUSS

Ok I decided to mod my Yamaha HS80m since I'm pretty happy with it but like anything it can always be better :) I've opened it...

xqtion

Hi everyone, I recently grabbed a simmons sdsv drum machine and I’d like to create an external midi drum brain to control it...

babaribou

I was given a SPX90II. It powers on, the menus work, it sees the input signal, but no sound is output on either channel. Is...

Systolic

He used to post on this forum but when COVID-19 hit he seemed to not be around anymore. I always enjoyed his knowledge and wit...

Thomas W. Bethe

Hi. I have a Spirit 328 mixing console with no boot problem. Need a Hardreseting or Firmware Flash but nothing is found files,...

Julitium

Hi there, My MXR Dyna comp bass mini I purchased second hand started giving some popping/cracking sound only when the stomp...

kernel71

Hi, I'm attempting to refurb this thing. It used to work quite well-few channels had a couple of problems, intermittencies but...

asrvegas

Looking to see if anyone has or knows where to get schematics for a CL 1B. I have one that's got input, got compression showing...

XSergeantD

I plugged up my rv10 and recorded some keyboard through it out of the headphone jack. I had to normalize the tracks, but it did...

sameal

Hey, I wonder if anybody has come across this. I just got a new Mackie 1202VLZ4 and it seems to have quite a problem with...

LincolnG

Looking for a downloadable set of manual/schematics for an Otari MX7300 and remote. I have tried PM'ing people offering in some...

HardRubbish

I just picked up a synth and the seller also showed me this transformer. He said he picked it up to build a stereo DI but hasn't...

joint.therapy

So I bought a control24. I like the workflow on it. But now it freaks out and lights all the lights when powering up. I saw...

muziekschuur

Hi there. Just found some re10’s and re15’s super cheap with bad diaphragms. Was hoping to find replacements but it’s...

JML Studios

Hi fellow musicians, Some time ago I got this unit from a friend of mine, but it's battery collapsed a long time ago and the...

Hypothesis

Hi GS, I'm in the need for a new step-down transformer/converter for my AC-MC800G PSU from 2023, since located in...

mjresc

Hi all, I am shouting out here and hoping to get some sort of interest or response from FOCAL PROFESSIONAL because, I must say...

Zeitgeist Master

Hi, how long should you wait before it's safe to work on the insides of your synth/sampler?

Dirgler

I found a great way to get to understand tone controls onthe SSL Bus+ was to measure its frequency response. I made a video that...

littlem4tt

Hi there :) Does anyone here use reel-to-reel (multi-track) for projects, like using tape sounds in a pc DAW...

kr236rk

Hi. I have a SSL XLogic alpha VHD 4-channel preamp with defect phantom power. I know from other forums that these mic pres...

PhantomBox

Earlier this year we bought a Peavey AMR 2400 console. Very happy with it. When we purchased the board I was told this one was...

jkchuma

Hi folks, Does anyone know of a Wurli electronics expert in the E.U.? Unfortunately due to a patchbay mix-up, i blew up...

I.R.Baboon