Tree Pre
Mic Preamp
Circuitry features two Inward Connection’s VF600 all discrete Amp blocks
LED VU meter that monitors the output level
+48VDC phantom power switch
Phase reverse switch
-20dB pad switch
Hi-Z low level line input 1/4" phone jack for
guitars, keyboards and low level instruments
12-position rotary trim (5dB per step)
25dB to 80dB selectable range
70 Hz hi-pass filter
Output level rotary control
Balanced input and output transformers
Fits standard 500 series slot configuration,
mechanically and electrically
Specifications:
Input Impedance
Mic Input: Transformer balanced, 200 ohm nominal input impedance source. Actual impedance
1200 ohms broad band
Hi-Z Input: >100K
Output impedance: 600 ohms nominal transformer balanced output
Frequency Response: +/- 0.5dB@20Hz to 50KHz
Equivalent Input Noise: -129dBm
Output Signal to Noise: -95dB
THD + Noise: +4dBu@1KHz: .015% (20Hz t 20KHz)
Maximum Output Level: +21dBm
...shopping list as well, so i’ll have to take a look at the Tree Comp! any thoughts on the Tree Pre 500 vs the MA5? my main vocal mics are a Soyuz Bomblet and an SM7B with the Launcher, so my thought is that both of those will benefit from the 27k rise on...
Tree are quality pieces, no question, and their preamp is not different, but is an opamp design (nothing wrong with it, like an api i.e., or most probably similar to a twin servo type of design, given the two opamps, I dunno for sure.. it’s my guess given two opamps in that preamp), anyway it’s...
id actually consider their tree pre for $1k and fits in my 500 series rack… whatyall think does it offer anything the capi vp28 doesnt for use with a pearlman tm-le https://vintageking.com/tree-audio-tree-pre-500-series-microphone-preamp
Nobody has reviewed this product yet. Have an opinion?