Hi everyone So we have opened this new sub forum where you can post pictures and words on your electronic DIY build repair and...

Tim Farrant

Here is my latest tube muxer build now delivered to a customer in Pasadena: four mic pres with stepped gain controls, phantom,...

ruffrecords

just a few pics of a dbx128 I recapped & modded http://i240.photobucket.com/albums/ff10/doulos24/dbx1181_zps15345c70.jpg...

doulos30

I bought the L2A back in 2018 when it was still $30 I believe. I used it more than a few times but something always sounded off...

Dfahb444

t.Bone SCT 800 stock is already a good deal. Build quality, shock mount, cable and case are quite good quality, as well as...

Nen'O

Hi everyone, I recently purchased a TAC Scorpion 16:8:2 in mint condition. I've decided to start a quick journal here for the...

Beatwulf

Wanted to share this mod to fix the slide pots on a UREI 535 EQ. I have 3 of these and all 3 have been upgraded with this kit....

Brian M. Boykin

Hi, I recently got my first synth and im triyng to do some experimental stuff. I would like to build a fully DIY Spring...

DiogoMM

Hey all, first time poster here I’ve tried to search through the forums as best I can but can’t really find anything, so...

Coxy_Muso

I see that Avantone just released a crossover (AV10 MXO) replacement for your old NS-10's. Now they have total of 3 spareparts...

Ripz

About the mic TLM170i, I own one of it bought in the 1986, please is there any schematic? Because the only one I found (on a...

TormyVanCool

I’m not sure which forum is best to ask this question, so I’ll start here. I have a Heritage Audio ‘73 jr which has sat...

GeneX1073

Hello fellow gear slutz and gurus. I seen another thread on a modification for the DBX 163X. I decided to touch up on the same...

ApronBeatz

Been able to successfully calibrate input and outputs as well as the repro card using an MRL tape. Now I've come to a stumbling...

Pat Maki

Hi Guys! I was curious if someone might be able to advice on setting up these guys to be a five channel stereo mix...

HappyHourStudio

¡Hi Geeks! Finally, after four years of research and development (read it learning), four prototypes, many nights without...

JAY X

Hi , I have an Audio developments AD 245 mixer that needs a PSU. Here are the specs from manual When driving the mixer from...

Joepepitone

Demonstration of Hammond necklace spring reverb tanks https://www.youtube.com/watch?v=q121TZlh7iQ At first I used a pair of...

Toobd

I wanted to share with you my mod on this Soundcraft series 2400 console. So what I did, I replaced the channel EQ's with SSL...

creativeblue

Looking for a hardware switch to control which of two MIDI boxes is the clock master. The two MIDI boxes - A and B - can each...

ClintGoss

Cannot get it open. It would be nice If someone could help with this! (Tip ain’t moving)

Studio Goblin

Hi, new to this forum, just picked up a Crest Century VX 52 channel. I took a bit of a punt on this one as it's without its...

johnylondon

Hello, I got this stored for 15 years. It is a US 120 v model modded for 220v euro. It does a lot of physical HUUUUM noise...

Akailama

I am adding some SSL-influenced mix bus compressors to my test pile. I just wrapped a Stam SA4000-5 MK2 and was surprised with...

adalogue

Hi, (First message on here so be nice :lol:) I have been looking for a 16-channel analogue line/instrument amplifier for my...

Lordy303

We have been working on this for the past two and a half years and it is finally finished. My tech wiz, Rhys Davies, built the...

Thomas W. Bethe

I stripped a TS-8390 embbeded computer from an old industrial machine and it included a 7 in touchscreen display. Putting aside...

ashohakan

Hey, I want to build a very simple box with two stereo inputs, two pan knobs (one for each input) and one stereo...

fael097

Hello all, I'm looking for info on buying or making two DPA DAO0130 130V Microphone Cables. I have a 2812 power supply and...

paulhwentz

Electro Harmonix 12AY7 Mic Pre Amp Modifications As I have noted a fair number of comments on the Internet, on problems and...

Dr F.

Hello, for the last 5 years my monitoring setup has been two quested vh2108, powered by a mc2 MC650 amp. ive always loved the...

sanoj

Hi, I started working on my (old, blue) Radial X-Amp box a few years ago, replacing a handful of parts to get the volume level...

resonator79

Hi, I want to make a simple box for my pedal board that has an xlr microphone input, output, and a 3.5mm headphones jack, so I...

fael097

Hi got the Superlux HI10 mic. I wanted to open it, in order to see if possible to make some mod. But, there are 3 wires are...

BartR

Dear friends, I need to shield several internal psu ( Ensoniq, Roland, EMS, Moog and so and so) old psu, I can´t stand...

Akailama

Hello Geekslutz, Newbie and hack from Japan here. Was fortunate enough to acquire a Soundcraft Spirit FX16 that was about to be...

Arumako

Hello all, first of all, I apologize if the topic has been addressed already on the forum (I haven't found anything about...

Mastropiero

I’m on the hunt for schematics that are readable for a sa39b that’s sitting on my bench right now. If anyone knows where to...

ado16

Hello! I just saw this and found it a good entertainment to do on a Sunday afternoon. What do you...

asier.

Hey, I am recapping an old Allen and Heath system 8 Mk3 and am thinking about upgrading the op amps. Is there a drop-in...

Txroye

Hello everyone. I wish I could borrow your wisdom about the AT8560, which is the power supply unit for the...

altivec

whell this small beast have great sound... and since i keeped one of few I had.... i spend some time using it in studio. I...

roginator

New small control panel mod for Prophet-600 Prophet 600 users have an upgrade.

Jpro600k

My experience MICROBRUTE Long Release Mod by connecting 4 capacitors ＝...

Jpro600k

Hey everyone. I’ve got a guitarist who uses 2 quad cortex units. I want to build an A/B XLR switcher for the stereo outputs....

Larusotours

Hello all, First time posting! I’ve had a pair of Roland DS-7 monitors that have been in daily use for nearly 10 years and...

Pianofreq

Hi guys, I just picked up a really cheap GT66 with a faulty power supply, it seems the unit was dropped and the transformer...

Mr Benn

Just wanted to share a controller that I made for my JU-06A Here is the trick. I used these 3 videos from Notes & Volts as...

xavierbzh

I tried googling this question, can't find anything. Is it as straightforward as I imagine? Connect live to live, Ground to...

cyborgcolin

I bought a Fender, screw on jewel light cover for my Peavey Delta Blues, thinking it would just screw on. However the original...

Marc Constantine

Hey Ya'll! I have looked all over the web and have not found a good resource for learning how to power 2 SSL Channel Strips...

Falcone